7. IO620-CASE-1. Fabric carry case with a belt loop,
shoulder strap and a large pocket for accessories. It can
hold one DPI 620-IS calibrator.
8. IO620-CASE-2. Fabric carry case. It can hold a set of
units: one DPI 620-IS calibrator; one MC 620-IS module
carrier; PM 620-IS modules and related accessories.
9. IO620-USB-PC. USB mini Type B cable to connect the
DPI 620-IS calibrator to a computer.
10. IO620-FIELD-CAL. Intecal field calibration manager. Use
the documenting functions in the calibrator with
elements of the Intecal database; set-up new device
records and procedures; upload Intecal data to your
computer database.
11. Pressure modules (PM 620-IS); refer to the datasheet.
12. Pneumatic hose kit rated to 400 bar (5800 psi) with “Quick
fit” connectors for the test port.
IO620-HOSE-P1-IS: 1 metre (≈ 39”)
IO620-HOSE-P2-IS: 2 metre (≈ 78”)
13. Hydraulic hose kit rated to 1000 bar (15000 psi) with
“Quick fit” connectors for the test port.
IO620-HOSE-H1-IS: 1 metre (≈ 39”)
IO620-HOSE-H2-IS: 2 metre (≈ 78”)
14. Pressure adaptor sets designed for the MC 620-IS,
PV 62x-IS and the hose kits:
IO620-BSP: G1/8, G1/4 male; G1/4, G3/8 and G½ female
IO620-NPT: 1/8NPT, ¼NPT male, ¼NPT, 3/8NPT, and
½NPT female
IO620-MET: M14 x 1.5 and M20 x 1.5 female
To Next Page
Loading...
