Issue 1
2-14 Prepare the instrument K0460 - [EN] English
2.9.1 Set the Process options (measure )
Note: Section 2.7 (Display operation) shows how to set and
change the values on the display.
Tare Use Tare to set a temporary value for zero. This makes an
adjustment to all subsequent readings on the display.
Alarm: When the alarm activates and displays the reading in red.
Set the tare to the reading on the display.
Set On or Off.
Shows the stored tare value.
Tap it to set another value.
Previous: Back one display.
Home: Back to start.
1
2
3
TAP
*Set the low alarm value.
Set On or Off.
*Set the high alarm value.
*Default (low/high) = Range limits.
Previous: Back one display.
Home: Back to start
Alarm state
1
2
3
To Next Page
Loading...
