Issue 1
iv Safety K0460 - [EN] English
• It is dangerous to attach an external source of pressure
to a PM 620-IS series pressure station. Use only the
specified mechanisms to set and control the pressure
in the pressure station.
Cautions
To prevent damage to the display, do not use sharp
objects on the touch-screen.
To prevent damage to the PM 620-IS module, only use it
within the specified pressure limit on the label.
Before starting an operation or procedure in this publication,
the user must have the necessary skills (if necessary, with
qualifications from an approved training establishment). Follow
good engineering practice at all times.
Marks and symbols
on the instrument
Complies with European
Union directives
Warning - refer to the
manual
Read the manual USB port: Mini type B
connector
Ground (Earth)
ON/OFF
Do not dispose of this product as household waste. Refer to
Chapter 9 (Maintenance procedures).
More marks and symbols are specified in this manual: electrical marks,
display symbols (Chapter 1); pressure related marks and symbols
(Chapter 4).
To Next Page
Loading...
