[EN] English - K0460 General specification 11-1
Chapter 11: General specification
11.1 Introduction
For a full specification of the DPI 620-IS calibrator and its
related accessories (MC 620-IS carrier, PM 620-IS module,
and PV 62x-IS pressure stations) refer to the datasheet
supplied on the CD (CD: P/N UD-0003).
Table 11-1: General specification
Display OLED: Colour display with touch-screen
Operating temperature -10 to 40°C (14 to 104°F)
Storage
temperature
-20 to 70°C (-4 to 158°F)
Ingress Protection IP65 (DPI 620-IS calibrator only)
Humidity 0 to 90% relative humidity (RH) non-condensing
Shock/Vibration Def Stan 66-31, 8.4 cat III
EMC Electromagnetic compatibility: BS EN 61326-1:2006
Electrical safety Electrical - BS EN 61010:2001
Pressure safety Pressure Equipment Directive - Class: Sound Engineering Practice (SEP)
Approved CE Marked
Battery power NiMH battery (GE Part number: IO620IS-Battery)
Capacity: 4000 mAh; Nominal voltage: 3.6 V
Charge temperature: 0 to 40°C (32 to 104°F)
If the charger senses the temperature is outside this range, it stops
charging.
Discharge temperature: -10 to 50°C (14 to 122°F)
Charge/discharge cycles: > 500 > 70% capacity
To Next Page
Loading...
