Installationof the range.
Read these instructions completely and carefully.
[] Electrical Connections (onsomemodels)
[] Usage Situations where Appliance
Power Cord will be Disconnected
Frequently.
Do not use an adapter plug in these situations
because discmmecting of the power cord places
undue strain on the adapter and leads to eventual
thilm'e (ff the adapter grotmd temfinal. The
customer should have the two-prong wall recel)tacle
replaced with a three-l)rong (grotmding) receptacle
bv a qualified electrician before using the
appliance.
The installation of appliances designed fin" mobile
home installation must conlimn with the
Manttlhcmred Home Construction and Safety
Standard, Title 24 CFR, Part 3280 (timnerly tl_e
Federal Standard for Mobile Home Construction
and Satiety, Title 24, HUD, Part 280) o_; when such
standard is not applicable, the Standard tot
Manufi_ctured Home Installations, latest edition
(Mamtthctm'ed Home Sites, Commtmities and
Set-Ul)s), ANSI A225.1, latest edition, or with local
codes. In (_ana(la, mobile home installation iiltlst
be in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation (:ode.
Electric Disconnect
I,ocate discmmect plug on tl_e range back.
Pinch sides of cmmector and pull out of range
back.
[] Seal the Openings
Seal any openings in tl_e wall behind the range and
in the floor trader tl_e range when hookul)s are
completed.
[]
Check Ignition of Surface Burners
Operation of all cooktop and oxen 1)m'ne_ should
be checked after the range and gas sui)i)ly lines
haxe been careflflE checked tot leaks.
Electric Ignition Models
Select a top bm'ner knob and simultaneously
push in and mrn to LITE position. Y)m will hear
a clickingsotmd indicating proper operation of the
sl)ark module. Once the air has been l)mged fl'om
tl_e supply lines, burnet_ should light within
4 seconds. _Mter burner lights, rotate knob out ot
tl_e LITE position. T_y each bm'ner in succession
tmfil all burne_ have been checked.
42
To Next Page
Loading...
