EasyManua.ls Logo

GE ZMC1095 - User Manual

GE ZMC1095
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Built-In
Microwave/Convection
and
Microwave Ovens
Models
ZMC1095
JEB1095
JEB1055
Installation
Instructions
Question and Answer IconNeed help?

Do you have a question about the GE ZMC1095 and is the answer not in the manual?

Summary

Important Safety Instructions

Safety Information

Product requires a three prong grounded receptacle and ground continuity check.

Electrical Requirements

Product rating 120 volts AC, 60 Hertz, 13 amps; requires proper supply circuit.

Usage

Appliance can be installed over any GE single electric built-in oven.

Design Information

Product Dimensions

Diagrams and specifications detailing the physical dimensions of the oven.

Cutout Dimensions

Required cabinet opening dimensions for flush installation of the microwave.

Electrical Location

Diagram indicating the recommended placement for the electrical outlet box.

Advance Planning

Guidance on cabinet sizing and use of side trim pieces for installation.

Installation

Installation Options

Details on recessed and shadow box installation methods for the built-in oven.

Step 1 Slide Microwave into Cutout

Instructions for carefully sliding the microwave oven into the prepared cabinet opening.

Step 2 Remove Grille Retainer Screws

Procedure for detaching the oven grille by removing retainer screws.

Step 3 Install Side Trim for 30 Appearance

Instructions for attaching optional side trim pieces for a 30-inch cabinet finish.

Step 4 Drive Installation Screws

Steps for drilling pilot holes and securing the oven to the cabinet with screws.

Step 5 Reinstall Grille

Final step to reattach the oven grille using the retainer screws.

Summary

Important Safety Instructions

Safety Information

Product requires a three prong grounded receptacle and ground continuity check.

Electrical Requirements

Product rating 120 volts AC, 60 Hertz, 13 amps; requires proper supply circuit.

Usage

Appliance can be installed over any GE single electric built-in oven.

Design Information

Product Dimensions

Diagrams and specifications detailing the physical dimensions of the oven.

Cutout Dimensions

Required cabinet opening dimensions for flush installation of the microwave.

Electrical Location

Diagram indicating the recommended placement for the electrical outlet box.

Advance Planning

Guidance on cabinet sizing and use of side trim pieces for installation.

Installation

Installation Options

Details on recessed and shadow box installation methods for the built-in oven.

Step 1 Slide Microwave into Cutout

Instructions for carefully sliding the microwave oven into the prepared cabinet opening.

Step 2 Remove Grille Retainer Screws

Procedure for detaching the oven grille by removing retainer screws.

Step 3 Install Side Trim for 30 Appearance

Instructions for attaching optional side trim pieces for a 30-inch cabinet finish.

Step 4 Drive Installation Screws

Steps for drilling pilot holes and securing the oven to the cabinet with screws.

Step 5 Reinstall Grille

Final step to reattach the oven grille using the retainer screws.

GE ZMC1095 Specifications

General IconGeneral
TypeCountertop
Capacity0.9 cu. ft.
Power Output900 Watts
Control TypeElectronic
TurntableYes
Weight34 lbs
DisplayDigital
Cooking PresetsYes
Defrost OptionsAuto Defrost

Related product manuals