EasyManua.ls Logo

GearLight S1050 User Manual

GearLight S1050
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
S1050 LED FLASHLIGHT
User Manual
TROUBLESHOOTING
If the flashlight flickers, works intermittently, changes modes automatically, appears
dim or faded, or does not turn on, check and verify that:
• Each battery is fully inserted matching the polarity (+/-) on the battery holder.
• Each battery end is touching a metal contact in the battery holder.
• The battery holder contacts are clean and the springs are not bent sideways.
• The flashlight's inner spring is firmly attached and not bent.
• The battery holder is inserted into the flashlight with the positive (+) end first.
• The tail cap is twisted on tightly.
Firmly press the power button on and o several times:
• If the flashlight still does not turn on, replace the batteries.
• If the problem persists, contact GearLight for a replacement.
Irvine, California | USA | www.GearLight.com
WARRANTY AND LIMITATION OF LIABILITY
MAINTENANCE
Inspect the flashlight monthly and carefully remove any damaged batteries and clean
any corrosion. If the flashlight is used less than once a month, remove the
batteries between uses. Lubricate all threads and
rubber O-rings with petroleum
jelly twice yearly.
Limited One-Year Warranty
GearLight warrants this product for one year from the date of purchase
against any defects in material or workmanship. This warranty does not cover
normal wear and tear, nor damage resulting from misuse or neglect. We will,
at our discretion, repair, replace, or refund the purchase price of this product
should we determine it to be defective.
Limitation Of Liability
Liability limited to the purchase price of this product. GearLight shall not be
liable for any incidental or consequential damages or any implied warranty on
this product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion
may not apply to you.
FOR YOUR SAFETY, READ BEFORE OPERATING
v2
2x GearLight S1050 LED Flashlights
2x 18650 Battery Tubes (Batteries Are Not Included)
2x AAA Battery Holders (Inside Flashlights)
2x Lanyards
1x User Manual
1x Warranty Card
Package Contents:
IMPORTANT SAFETY NOTICE: Lithium-ion batteries are potentially hazardous and can
present a fire, explosion, and burn hazard. By using lithium-ion batteries, you agree that
GearLight shall not be liable for any incidental or consequential damages arising from,
relating to or connected with the use of lithium-ion batteries. If you do not agree with
these conditions, please use only alkaline or NiMH rechargeable batteries.
Question and Answer IconNeed help?

Do you have a question about the GearLight S1050 and is the answer not in the manual?

GearLight S1050 Specifications

General IconGeneral
Brightness1000 lumens
MaterialAluminum
Water ResistanceIPX4
ModesHigh, Medium, Low, Strobe, SOS
Battery Type3 x AAA

Summary

Troubleshooting and Maintenance

Troubleshooting

Addresses common flashlight issues like flickering, dimness, or failure to turn on, with verification steps.

Maintenance

Instructions for regular inspection, cleaning, and lubrication of the flashlight and its components.

Warranty and Liability Information

Limited One-Year Warranty

Details the product warranty against defects in material or workmanship for one year from purchase.

Limitation Of Liability

Specifies liability limits for incidental or consequential damages related to the product.

Important Safety Notice

Package Contents

Getting Started with Your Flashlight

AAA Battery Installation

Step-by-step guide for correctly inserting AAA batteries into the flashlight holder.

18650 Battery Installation

Instructions for installing a 3.7v Lithium-ion rechargeable battery into the flashlight.

Flashlight Operations

On/Off

How to turn the flashlight on and off using the power button.

Switching Modes

Explanation of how to cycle through HIGH, MEDIUM, and LOW lighting modes.

Twist Zoom

Instructions on how to adjust the beam focus from wide to spot.

Related product manuals