GearLight S2500 - User Manual

To Next Page

S2500 LED FLASHLIGHT

User Manual

TROUBLESHOOTING

If the ﬂashlight ﬂickers, works intermittently, changes modes automatically, appears

dim or faded, or does not turn on, check and verify that:

• Each battery is fully inserted matching the polarity (+/-) on the battery holder.

• Each battery end is touching a metal contact in the battery holder.

• The battery holder contacts are clean and the springs are not bent sideways.

• The ﬂashlight's inner spring is ﬁrmly attached and not bent.

• The battery holder is inserted into the ﬂashlight with the positive (+) end ﬁrst.

• The tail cap is twisted on tightly.

Firmly press the power button on and o several times:

• If the ﬂashlight still does not turn on, replace the batteries.

• If the problem persists, contact GearLight for a replacement.

Irvine, California | USA | www.GearLight.com

WARRANTY AND LIMITATION OF LIABILITY

MAINTENANCE

Inspect the ﬂashlight monthly and carefully remove any damaged batteries and clean

any corrosion. If the ﬂashlight is used less than once a month, remove the

batteries between uses. Lubricate all threads and

rubber O-rings with petroleum

jelly twice yearly.

Limited One-Year Warranty

GearLight warrants this product for one year from the date of purchase

against any defects in material or workmanship. This warranty does not cover

normal wear and tear, nor damage resulting from misuse or neglect. We will,

at our discretion, repair, replace, or refund the purchase price of this product

should we determine it to be defective.

Limitation Of Liability

Liability limited to the purchase price of this product. GearLight shall not be

liable for any incidental or consequential damages or any implied warranty on

this product. Some states do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitation or exclusion

may not apply to you.

FOR YOUR SAFETY, READ BEFORE OPERATING

1x GearLight S2500 LED Flashlight

1x AA Battery Holder (Inside Flashlight)

1x Lanyard

1x User Manual

1x Warranty Card

Package Contents:

Need help?

Do you have a question about the GearLight S2500 and is the answer not in the manual?

Summary

Warranty and Limitation of Liability

Limited One-Year Warranty

GearLight warrants product for one year against defects in material or workmanship.

Limitation Of Liability

GearLight not liable for incidental or consequential damages or any implied warranty on this product.

Operations

On;Off

Turn the flashlight on by pressing the power button firmly until a click. Turn off by pressing again.

Switching Modes

Switch between HIGH, MEDIUM, and LOW modes by gently pressing the power button.

Twist Zoom

Twist the flashlight clockwise to focus the beam, counter-clockwise for a dispersed beam.

Getting Started

AA Battery Installation

Unscrew tail cap, insert six AA batteries following polarity, then insert holder into flashlight.

The GearLight S2500 LED Flashlight is a high-powered, durable illumination device designed for various applications, from everyday use to more demanding environments. Its primary function is to provide bright, adjustable light, offering different modes and a zoom feature to suit diverse lighting needs.

Function Description:

The S2500 LED Flashlight serves as a portable light source, capable of emitting a powerful beam. It features a high-grade aluminum body, ensuring durability and a robust feel. The flashlight is equipped with a powerful LED, providing strong illumination. A key functionality is its ability to switch between three distinct lighting modes: HIGH, MEDIUM, and LOW, allowing users to adjust the brightness based on their requirements and conserve battery life when maximum output isn't necessary. Another significant feature is the "Twist Zoom" head, which enables users to transition between a focused, extended beam and a broad, dispersed light beam. This versatility makes it suitable for both long-range spotting and wide-area illumination. The flashlight is designed with an anti-roll feature, preventing it from easily rolling off surfaces.

Important Technical Specifications:

While specific lumen output or beam distance are not explicitly stated, the "Powerful LED" and "High-Grade Aluminum Body" indicate a focus on strong performance and durability. The flashlight operates on six (6) AA batteries, housed within a dedicated battery holder. The battery holder is designed for correct polarity insertion, with clear markings for positive (+) and negative (-) ends. The tail cap, which houses the power button, is designed to be twisted on tightly to ensure proper contact and operation. The flashlight utilizes a rubber O-ring, suggesting a degree of water resistance or protection against dust, although an IP rating is not provided.

Usage Features:

On/Off Operation: The flashlight is turned on and off by firmly pressing the red power button located on the tail cap until a distinct "click" is heard.
Mode Switching: To cycle through the HIGH, MEDIUM, and LOW lighting modes, users gently press the red power button. The flashlight is designed to switch to the next mode with quick successive presses. A smart memory feature ensures that if the flashlight is turned off and on quickly, it will switch to the next mode. However, if it remains off for more than 20 seconds, it will reset to the HIGH mode upon the next activation.
Twist Zoom: The zoom function is intuitive. By holding both ends of the flashlight and gently twisting clockwise, the head extends to focus the beam, creating a more concentrated light. Twisting in the opposite direction retracts the head, dispersing the light for a broader coverage area. This allows for on-the-fly adjustment of the beam pattern.
Battery Installation: The process involves unscrewing the tail cap, removing the battery holder, inserting six AA batteries according to the marked polarity, and then reinserting the battery holder with the positive (+) end first before twisting the tail cap back on tightly.
Lanyard: The inclusion of a lanyard provides a convenient way to carry the flashlight, preventing accidental drops and keeping it accessible.

Maintenance Features:

The manual outlines clear maintenance guidelines to ensure the longevity and optimal performance of the GearLight S2500 LED Flashlight:

Monthly Inspection: Users are advised to inspect the flashlight monthly. This includes checking for any damaged batteries and promptly removing them, as well as cleaning any corrosion that may have developed.
Battery Removal for Storage: If the flashlight is used less than once a month, it is recommended to remove the batteries between uses. This helps prevent battery leakage and potential damage to the flashlight's internal components.
Lubrication: To maintain the smooth operation of threaded parts and the integrity of the rubber O-rings, users should lubricate all threads and O-rings with petroleum jelly twice yearly. This helps prevent wear and tear, ensures a good seal, and facilitates easy disassembly for battery changes or cleaning.
Troubleshooting: The manual provides a comprehensive troubleshooting section for common issues like flickering, intermittent operation, automatic mode changes, dimness, or failure to turn on. This includes checking battery polarity, contact cleanliness, spring integrity, battery holder insertion, and tail cap tightness. It also suggests pressing the power button multiple times and replacing batteries if issues persist, or contacting GearLight for replacement if necessary.

Safety Warnings and Cautions:

Eye Safety: A critical warning advises against staring directly into the light beam or shining it into anyone's eyes to prevent eye injury. The product is explicitly stated as not designed, intended, or recommended for children or hazardous environments.
Heat Generation: A caution notes that the flashlight may become warm or hot after extended periods of use at the highest setting. Users are advised to select a lower setting when the flashlight becomes hot, clarifying that this is typical for high-powered flashlights and does not indicate damage.
Battery Safety: Strict adherence to battery manufacturer's instructions for usage, handling, storage, and disposal is emphasized. Users are warned to use only batteries from reputable manufacturers, avoid mixing different brands or types of batteries, and replace all batteries at the same time. Failure to follow these safety instructions can result in personal injury and property damage.

Warranty and Limitation of Liability:

The GearLight S2500 LED Flashlight comes with a Limited One-Year Warranty, covering defects in material or workmanship from the date of purchase. This warranty excludes normal wear and tear, misuse, or neglect. GearLight reserves the right to repair, replace, or refund the purchase price for defective products. The Limitation of Liability states that liability is limited to the purchase price of the product, and GearLight is not liable for incidental or consequential damages or any implied warranty.

In summary, the GearLight S2500 LED Flashlight is a robust, versatile, and user-friendly illumination tool designed for reliability and adaptability, with clear instructions for safe operation and maintenance.