EN
1 Connect the electrofusion machine to
the supply voltage.
✓ Mains connection LED display
lights up.
2 Connect the connecting cable for
electrofusion coupling to the electro-
fusion sleeve coupling or the electro-
fusion tape for anchor point.
✓ Ready for welding LED display
lights up.
3 Press the start button.
✓ Welding procedure LED display
lights up and the Ready for
welding LED display goes out.
4 After approx. 80 seconds, the
welding is complete and the sleeve
connection plug can be unplugged.
✓ Welding procedure LED display
goes out and the Welding
complete LED display lights
up.
Result
✓ Welding has been performed correctly.
24
72057596303590795 © 11-2023
967.778.00.0(03)
To Next Page
Loading...
