1
direct to function
selection wheel:
water care -
maintenance -
date & time -
keypad -
electrical config -
wifi -
about -
spa mode
spa mode
To select the spa mode, slide the left wheel up
or down until the spa icon is highlighted in the
middle.
The home page will be displayed its equipment
start or stop keys, up and down buttons, water
temperature, messages and quick access to
display options:
• display orientation
• display contrast
To select an option, slide the right wheel up or
down until the desired icon menu is highlighted in
the middle.
display orientation
To modify the display orientation settings, slide
the right wheel until the display orientation icon is
highlighted in the middle.
Simply touch the line of the orientation you want
to select.
start or stop accessories
To start or stop an accessory (pump, blower,
light), touch the associated icon. Icons will
become animated when their accessory is turned
on, and animation will stop when turned off.
Icons on the screen will reflect the speed or state
of the devices running on your spa. When an
accessory has more than two speeds press the
button until it reaches the desired speed.
display contrast
To modify the display contrast settings, slide
the right wheel until the display contrast icon is
highlighted in the middle.
Simply touch the line of the contrast you want
to select.
water temperature
The temperature shown at the bottom of the
screen shows the current water temperature.
Use the Up and Down icon to set the desired
temperature. The set point will appear in blue.
After 3 seconds without any change to the set
temperature value, the current water temperature
will reappear.
When the set value is lower than the current
temperature Cooling to xx.x will appear below.
When the set value is higher than the current
temperature, Heating to xx.x will be indicated
under the value. Normally there is a short delay
before the heating starts, during which Heating
Suspended is indicated under the value.
list of featured items
mode selection
wheel:
settings icon
settings
You can use the Settings mode to manage settings of your spa system.
To select the settings mode, slide the left wheel up or down until the settings icon menu is highlighted in
the middle.
In the Settings page you can access the following:
• water care • electrical configuration
• maintenance • wifi
• date & time • about
• keypad
To select an item, slide the right wheel until the desired icon is highlighted in the middle or press on the
menu name.
To Next Page
Loading...
Need help?
General
