Gecko in.k1000 Quick Reference Card

1
direct to function
selection wheel:
on/off -
bromicharge -
boost levle -
maintenance -
statuts and messages
mode selection
wheel:
in.clear icon
sanitization mode
(only available if the system detects a connected in.clear water sanitization system)
To select the sanitization mode, slide the left wheel up or down until the in.clear icon menu is
highlighted in the middle.
In the sanitization page you can access the following:
• in.clear on/off • boost level
• bromicharge • maintenance level
To select an item, slide the right wheel until the desired icon is highlighted in the middle.
on/off
bromicharge™ level
turn in.clear ON
Slide the right wheel until the power on/off icon
is highlighted in the middle. Press on the in.clear
icon to turn in.clear on.
in.clear activity screen
The in.clear activity info screen will appear on
the display.
To perform a water test, slide the right wheel until
the add BromiCharge icon is highlighted in the
middle.
There is no need to add sodium bromide if the
indicator is in the green zone.
When adding sodium bromide, the gauge
indicator will gradually shift to the right. When
adding clean water to the spa, the indicator will
shift to the left.
In order to achieve the proper level, start pumps
and add 227g (.5 lb) of BromiCharge™ at a time
and always allow 5 minutes for the gauge to react
before adding more sodium bromide.
When performing a test, the BromiCharge™
gauge indicates the approximate sodium bromide
level of the spa water.
The green zone in the center area of the gauge
should be targeted for optimal performance.
turn in.clear OFF
Press on the power on/off icon to turn in.clear off.

Gecko in.k1000 Specifications

General

Brand	Gecko
Model	in.k1000
Category	Keypad
Language	English