EasyManuals Logo

Gecko in.k330 User Manual

Gecko in.k330
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
9
Keypad functions
Custom key
This key is available for 1-pump systems only� It is also
available only if the spa controller configuration uses a
functionality related to the Custom key�
The following functions are available on this key:
• Quick On Off
• Soak
• Auxiliary output
• Off
• Manual Economy
A short press on the Custom key will turn on or off the selected mode in the list�
Quick On Off
This function allows you to shut down all the active user
demands (pump and light) by a key press and resume
their state by another press�
Activating or deactivating Quick On Off mode with the
Custom key will have no special message being displayed�
Soak
This function allows you to soak in silence in the spa�
When enabled, Soak mode stops all pumps activated by
the user as well as the filtration and Smart Winter Mode
cycles for 30 minutes�
Water temperature regulation remains active as well as
circulation pump if it is configured as “Always On”�
While Soak mode is engaged, the display toggles between
the "Sby", the time and the water temperature� The display
will show "On" for 3 seconds upon exit of Soak mode
Auxiliary output
It allows you to control an auxiliary output� When the
control of the Auxiliary is selected by the Custom key,
"AUX" blinks on the display� Then, the Auxiliary can be
turned On or Off by another press on the Custom key�
When the Auxiliary output is being turned on, the display
shows "On" for 3 seconds� When the Auxiliary is being
turned off, the display shows "OFF" for 3 seconds�
Auxiliary output will be turned off automatically after
20 minutes if it is not done manually� Note that your spa
controller can be configured with a different timeout�
Off
(Described previously in this document)
Manual Economy
This mode allows you to lower the temperature set point
of the spa by 20 °F (11 °C)� When the Economy mode is
ON, the display toggles between the “Eco” message, the
time, and the water temperature� The display will show
"noE" for 3 seconds upon exit of Economy mode

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Gecko in.k330 and is the answer not in the manual?

Gecko in.k330 Specifications

General IconGeneral
BrandGecko
Modelin.k330
CategorySpa Accessories
LanguageEnglish

Related product manuals