Description
Main functions
Quick Reference Card
Please consult your spa user manual for complete info on the features of your spa system.
in.k600
™
Advanced series of full-function keypads that give complete control to wet fingers!
Aeware's® new series of keypads features a high profile with a large LCD display, menu-driven interface that let users easily control
all in.xm™ functions and programming directly from spa side, creating a true and unique user experience.
Pump
icons
Lock icon
Time, temperature
& message digits
Progress bar icon
Menu title
Operation Mode
Information Display
Status
icons
Light
icons
"Ok" Key
"Next" Key goes
to menu page
"Mode" Key
selects mode of
operation: Spa,
Audio, Options
"Right"
Multi-
function
Key
"Minus" Key
decreases par-
ameter setting
"Left" Multifunction
Key goes back to
previous parameter
setting or increases
parameter value
"Soft" Key 1,
2, 3, 4
"Plus" Key increases
parameter setting
Service
icon
AM/PM
(˚F/ ˚C)
• Select Spa to view Spa menu.
Starting Pump 1
• Select Pump 1 to turn Pump 1 on.
• Select Pump 1 repeatdely to
control pump 1 speeds.
(20 minute built-in timer)
Starting all accessories
• Press the Quick On/Off button
to start all accessories (pumps
and turbines) in high speed.
• Press the Quick On/Off button
again to stop all accessories
(pumps and turbines). There is
an integrated 120 minute timer.
(120 minute built-in timer)
Starting Light
• Select Light key to turn light on.
• Select Light key repeatedly to
control light intensity. A final
selection turns light off.
(120 minute built-in timer)
Next menu page
• Press Next key to display the
next page in the spa menu.
Goes to blower option
This menu allows control of all
pumps, blower and spa light, as
well as the activation of the Eco-
nomy and Standby modes. Every
time a device is on, its animated
icon is displayed. All pump activi-
ty can be stopped at once by
activating the Standby mode.
Starting Pump 2*
• Select Pump 2 to turn Pump 2 on.
• Select Pump 2 repeatdely to
control pump 2 speeds.
(20 minute built-in timer)
• Press Mode key to display
the mode Selection window.
Starting Pump 3*
• Select Pump 3 to turn Pump 3 on.
• Select Pump 3 once more to
turn pump 3 off.
(20 minute built-in timer)
Water temperature setting
• Press Plus/Minus key to select
water temperature setting.
• Press OK key or wait 5 seconds
to confirm new setting.
The “Set Point” prompt
indicates the desired
temperature NOT the current
water temperature.
*option available depending upon factory settings
To Next Page
Need help?
General
