Gecko MSPA-1-AS User Manual

3MSPA-1-AS
Tools & Test Equipment:
Pack Parts:
Pliers
Phillips & flat screwdrivers
11/32" (M8) nut driver
1/4" (M6) open-end wrench
3/8" (M10) open-end wrench
Jumper cable
Multimeter
GFCI tester & digital thermometer (optional)
Temperature probe
High-limit sensor
MSPA-1-AS system board
(or complete spa pack)
Transformer
Pressure switch
Fuses
Top side control
The following tools, test equipment and components are necessary to
perform service calls on an MSPA-1-AS Power Spa Pack.
Notes: The equipment delivered may slightly differ from the illustrations shown in this manual.
Gecko Electronics Inc. sells Professional Repair Kits that include everything needed for
MSPA-1-AS Power Spa Pack servicing. For more information, go to the last page of this
manual.
PRELIMINARYRequired Material

Gecko MSPA-1-AS Specifications

General

Brand	Gecko
Model	MSPA-1-AS
Category	Spa Accessories
Language	English