page 14 SERVICE MANUAL FOR PRODUCERS SBR TYPE G-201-P00
PPUH „GECO” - G-201-P00 01,02 PRINTOUT DATE 05-01-24
X. RETURNS FOR REPAIR
If there is a breakdown and G-201 is returned for a repair, it is required
unconditionally that the replacement form whose sample is enclosed at the end of
the manual be filled in completely. It is recommended not cut out the form but to
photocopy it.
PPUH ‘GECO’ reserves the right to refuse a free repair of the unit, if
there is no form, the form is not filled in completely or the seals are
broken !!!
P.P.U.H. ‘Geco’ Sp. z o. o. is not responsible for loses and damages resulting
from provision of information on the method of making changes in the system
data of G-201 by the producer or its service to the final client, incorrect or
non-professional assembly and for loses caused by defective operation of the
appliance.
XI. CHANGES IN THE CONTROL
17.06.2004: introduction of version 2of the control. Added parameters:
- D6: overheating alarm,
- R0: operation of 2 types of temperature sensors
- R1 expanded: operation of the valve and higher power transformer.
To Next Page
Loading...
Need help?
General
