Geco G-201-P00 Series User Manual

P.P.U.H. „Geco” spółka z o. o.
30-134 Kraków, ul. Zarzecze 112A
tel. +48 (12) 6369811,6361290
fax. +48 (12) 6362002
e-mail:
geco@geco.pl
http://www.geco.pl
SERVICE OPERATING MANUAL
FOR INDEPENDENT CONTROL
UNIT
G-201-P00…
VERSION FOR COOLING APPLIANCES
For software version 01,02
You are kindly asked to study instructions carefully before connecting and starting up each of
our appliances. If you have any doubts, please contact us from 8.00 till 16.00. Any remarks
sent to us by e-mail shall be a valuable help.
Notice !!! At the bottom of the following pages the date of the latest updating is given
and at the end of page XVI there is information on the changes in program versions and
the mode of operation that followed.
You are asked to use always the newest version of operating manual which can be received
free of charge by mail after submission of an order.

Geco G-201-P00 Series Specifications

General

Brand	Geco
Model	G-201-P00 Series
Category	Control Unit
Language	English

Summary

General Characteristics

Method of Marking and Technical Data

How to Order

Installation and Connection of G-201

Installation of Sensors

Operation Method

General Information

Overview of unit startup, button functions, and general operation.

Defrosting

Details the procedures for manual and automatic defrosting cycles.

Hysteresis

Explains the concept and settings of hysteresis for temperature control.

Charts Presenting Operation of Particular Elements of the Unit

Programming of System Parameters

Problems and Their Removal

Returns for Repair

Changes in the Control

Operation of G-201: For Users

Setting a Defined Temperature

Guides users on how to adjust and set the desired temperature.

Switching on/off of Lighting

Explains the function of the lighting control button.

Switching on of Manual Defrosting

Details how to manually initiate the defrosting cycle.

Alarms

Describes alarm codes (A1, A2, A4) and their meanings.