Geco GHC201.07 User Manual

SERVICE OPERATING MANUAL FOR INDEPENDENT CONTROL UNIT
GHC201.07
GHC201.08
Version for cooling and heating appliances
For software version 03A
You are kindly asked to study instructions carefully before connecting and starting up each of our appliances. If
you have any doubts, please contact us from 8.00 till 16.00. Any remarks sent to us by e-mail shall be a
valuable help.

Geco GHC201.07 Specifications

General

Brand	Geco
Model	GHC201.07
Category	Control Unit
Language	English

Summary

General Characteristics

Method of Marking and Technical Data

How to Order

Installation and Connection of GHC201.08

Installation of Sensors

Operation Method

General Information

Provides an overview of the unit's startup procedure, button functions, and initial display states.

Functional Description of Control Blocks

Explains how the controller manages heating and cooling based on sensor inputs.

Programming Relay Functions

Details how to configure and assign functions to the controller's output relays.

Programming User Parameters

Guides users through setting and modifying operational parameters like temperature setpoints and hysteresis.

Alarms and Emergency Operation

Covers sensor failure alarms, temperature exceeding alarms, and how the unit operates during fault conditions.

Temperature Display

Explains how the controller displays temperature readings from different sensors and how to switch between them.

Programming of System Parameters

Problems and Their Removal

Troubleshooting Common Issues

Provides guidance on diagnosing and resolving common operational problems with the GHC201.08 controller.

Method of Connection Devices to the Controller

Information about Marking and Collection of Used Electrical and Electronic Equipment