USER INSTRUCTIONS GH11RA STRONA 5
Wydanie I STYCZEŃ 2010
3. ELECTRICAL SYSTEM AND CONNECTION GUIDELINES
1. The boiler room should be equipped with a 230V/50Hz electrical system, according to the
applicable regulations.
2. The electrical system (regardless of its type) should be terminated with a connection outlet fitted
with a protective terminal. Use of an outlet without a protective terminal causes electrical shock
hazard!!!
3. Connect the Controller to a separately installed power line protected with a properly selected
quick circuit-breaker or a residual-current device (RCD breaker). Do not connect any other devices
to this line!!!
REGULATOR ZASILANY JEST Z SIECI 230V/50HZ
JAKICHKOLWIEK NAPRAW MOŻNA DOKONAĆ TYLKO PRZY
ODŁĄCZONYM ZASILANIU NA BEZPIECZNIKU
4. QUICK START
To quickly start the GH11RA Controller, perform the following actions:
1. Connect the device to the 230V AC power system (put the plug in the power outlet).
⇒
2. Turn the Controller ON by pressing . Screen appears:
To Next Page
Loading...
Need help?
General
