32
RS-232 SERIAL COMMANDS
DSB Command
The DSB sets the distance of the Subwoofer.
Syntax:
DSB param1
Parameters:
param1 Level [0 ...10]
Notes:
The + or - character can also be used, instead of specifying a value, in order to
increase or decrease the Subwoofer distance by 1 foot intervals.
Use ? for param1 to retrieve the current value.
FLR Command
The FLR command sets the size of the Front Left and Front Right speakers.
Syntax:
FLR param1
Parameters:
param1 Value
Value Meaning
Small Small Speaker
Large Large Speaker
Notes:
Use ? for param1 to retrieve the current value.
To Next Page
Loading...