33
RS-232 SERIAL COMMANDS
LFV Command
The LFV command sets the Front Left speaker volume.
Syntax:
LFV param1
Parameters:
param1 Level [-10...10]
Notes:
The + or - character can also be used, instead of specifying a value, in order to
increase or decrease the Front Left speaker volume by 1 dB intervals.
Use ? for param1 to retrieve the current value.
MUTE Command
The MUTE command enables or disables audio muting.
Syntax:
MUTE param1
Parameters:
param1 Value
Value Meaning
OFF Turn Muting Off
ON Turn Muting On
TGL Toggle Muting
Notes:
Setting param1 to TGL will automatically toggles the current state of the muting
command. This is the non-implicit form of enabling or disabling audio muting.
Use ? for param1 to retrieve the current value.
To Next Page
Loading...