Need help?Do you have a question about the Gefen EXT-COMPAUD-CAT5-142 and is the answer not in the manual?
Description of the 5V DC power input port on the receiver unit.
Description of the RJ-45 jack for CAT-5 cable connection.
Connect the VGA video source to the sender unit using the provided cable.
Connect the audio source to the sender unit using a 3.5mm stereo cable.
Connect up to two VGA displays to the receiver unit using VGA cables.
Connect audio outputs on the receiver to amplified audio devices.
Connect the sender and receiver units using a single CAT-5e or CAT-6 cable.
Connect the included 5V DC power adapters to both units.
Power on all displays first, then power on the source device.
To Next Page
General