READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 1:2 VGA AUDIO OVER CAT5
• Use only industry standard Category-5 Enhanced (CAT-5e) cable to operate
the 1:2 VGA Audio over CAT5. Cat-6 cables can also be used.
• Both the sending and receiving units must be powered with the supplied power
adapters for proper operation.
• Field termination of CAT5e cabling must adhere to the TIA/EIA-568-B
specifi cation. Please see page 10 for additional information.
2
OPERATION NOTES
To Next Page
Loading...
