GEL DECAL - Drain and Overflow Hose Connection; Drainage and Siphon Safety

ENGLISH
57
Connect the drain hose of the valve and the overflow hose of
the salt container to the drain with two separate hoses (supplied
with the system – see installation drawings). IMPORTANT: The
drain must be free (at atmospheric pressure) and not sealed.
Provide a siphon drain pipe with enough draining capacity (Ø
25 mm for models up to Decalux 60 and Decal 200; Ø 40 mm
for models from Decal 140 B to 500 B).
The drain must be lower than the “overflow” level of the tank.
YES NO