ENGLISH
59
- For pressures lower than 2 atm. install a pumping system with surge tank.
- For pressures higher than 6 atm. install a pressure reducer.
- After the water meter, install a check valve.
- For potable use a residual hardness of 15° f is recommended, for which the installation of a mixing
valve (manual or automatic) is necessary.
- For potable use the resins disinfection system is recommended (model with AD code).
After installation, for start up and testing of the equipment, directly contact your dealer or
installer from whom you have purchased the machine.
Do not use the equipment before the start up and testing carried out by your dealer or
authorized technical staff.
To Next Page
Loading...