EasyManua.ls Logo

GEL DECALUX BASIC - General Directions and Safety; Installation and Electrical Safety

Default Icon
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
30
5 - GENERAL DIRECTIONS
To best use your appliance, we recommend to carefully read this instruction manual.
The water softener must be installed in a dry room protected from frost and hygienically suitable, away
from sunrays and accessible for future maintenance, cleaning and salt refilling.
If the unit has been laid down or turned upside down, wait at least 8 hours before starting it up.
The installation and the electrical connection must be carried out by a qualified technician, by observing
the national regulations in force and the instructions listed in section 9 of this manual.
To avoid dangers of electrical shocks, never open the timer.
Before any maintenance or cleaning operation, unplug the unit.
The electrical system must be fitted with a good earthing in compliance with the national regulations
in force.
Do not pull the power supply cable for unplugging the unit.
6 - ASSEMBLING AND DISASSEMBLING
Any possible assembling of the components must be carried out by the authorized Technical Assistance
Service.
If within the first 2 years of warranty the softener needs to be moved to another location, it will be necessary
to call the authorized Technical Assistance Service for a new start up and testing.
7 - HANDLING & TRANSPORT
7.1 HANDLING
Handle the softener by keeping the original packaging.
Do not turn upside down, but respect the direction of the arrows printed on the packaging.
Use suitable handling systems.
Do not stack.
Do not cause crashes.
For Decalux models watch out to the possible loss of balance when handling.

Related product manuals