Installing/Changing the Till Rolls
Your cash register is fitted with a thermal printer which uses a 58mm paper roll. If a
customer receipt is not always required, then there is a paper saving option available by
pressing the button on the keyboard (this is indicated by an LED on the display).
A receipt is available on request after the sale by depressing the button.
Fig 1
Before installing the paper roll, be sure to do the following:
Orient the paper roll so that it rotates in a counter clockwise direction, as shown above.
Please Note: Thermal paper has a heat sensitive side for printing.
If you install it the wrong way around, it will not print.
Avoid touching the metal paper cutter when removing the paper cover, it is very
Sharp.
Installing the Paper Roll
Step 1
Lift up the printer cover from the front as shown in
the diagram
To Next Page
Loading...
