GK350 25
Note: It is not possible to assign separate and inde-
pendent MIDI channels to the voices and accompani-
ment sections.
MIDI
The MIDI section consists of two functions, TX and RX, which allow you to set the
Transmission (TX) and Reception (RX) channels independently for the keyboard as
a whole. Both Reception and Transmission channels also feature a Control Change
filter (on/off).
Midi channel selection
You can set the MIDI Transmission and Reception channels to any value from 1 -16,
or OFF.
If you press the MIDI [TX] button, the display shows the factory-set MIDI Transmis-
sion channel.
If you press the MIDI [RX] button, the display shows the factory-set MIDI Reception
setting (in this case All channels).
Use the [YES/+] button of the numeric keypad to increase the Transmission or Re-
ception channel, or the [NO/–] button to decrease it.
Control Change filter
To set the Control Change filter for either the Transmission (TX) or Reception (RX)
channel, press the [TX] or [RX] button twice. The display shows the current setting
(Off).
To activate (On) or deactivate (Off) the filter, use the [YES/+]-[NO/–] buttons of the
numeric keypad.
To Next Page
Loading...
