Gema OptiCenter OC03 User Manual

Switch on the plant V 01/16 CM30 Start-up
!!Caution!!
In Waste powder mode only fresh powder is used.
There is NO powder recovered!
It is imperative to switch to the Recovery mode after a
certain period!
On the OptiCenter
7. Put the powder bag into the FP cone, place
the cover and insert the FP lance
8. Select the Waste powder mode
9. Confirm the RP hose position

Gema OptiCenter OC03 Specifications

General

Brand	Gema
Model	OptiCenter OC03
Category	Control Unit
Language	English