Intelligent Document Reader AT10Ki User Guide Introduction
Page 6 of 41
Important Safety Information
This manual contains important information regarding the operation of the Gemalto Intelligent Document
Reader AT10Ki. For the safe and reliable operation of the readers, all users must ensure that they are
familiar with and fully understand all instructions contained herein.
Indicates a hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a hazardous situation which, if not avoided, could result in injury or
equipment damage.
Indicates a situation which, if not avoided, could result in equipment damage.
Provides additional important information.
To reduce the risk associated with hazardous voltage which, if not avoided, could result in
death or serious injury:
Do not use the reader with any AC power supply other than the provided Gemalto AC
power supply.
Do not use AC power supply and/or power cord if it is damaged.
Do not open the reader and/or power supply. Reader is to be serviced by trained
personnel only. No user serviceable parts or adjustments inside.
Do not modify or attempt to modify the reader and/or AC power supply.
Use only in an indoor dry location. Do not use the product in an outdoor and/or wet
environment.
To reduce the risks associated with environmental contamination which, if not avoided, could
result in minor or moderate injury:
Dispose of electronic waste in accordance with all applicable regulations.
Only an authorized, trained technician should perform change the glass. Failure to
correctly follow the instructions could result in injury or cause damage to the
equipment. Readers with broken glass should be sent to a repair centre for cleaning
and safe disposal of the broken glass pieces.
Modifications or changes to the Product, the interface cables or the power supply not
expressly approved by the manufacturer could void the User's authority to operate the
Product and/or break local laws or regulations.
To Next Page
Loading...
Need help?
General
