Gemalto AT9000 MK2 User Manual

Document Reader AT9000 MK2 User Guide Specifications
Page 28 of 33
5. Specifications
Physical
Specifications
Dimensions
Length:
Without smartcard module: 19 cm (7.5 inches)
With smartcard module: 20 cm (8.0 inches)
Width: 16.2 cm (6.4 inches)
Height: 15.7 cm (6.2 inches)
Imaging Window
125 x 88 mm (4.92 x 3.47”)
4.0 mm (0.157") tempered glass *
Weight
1.25 kg (44 ounces)
Electrical
Specifications
Input voltage
5 V DC, from external power supply or USB 2.0 host port
Power consumption
Less than 2.5W (USB 2.0 powered)
Connector
3-pin locking
PSU Efficiency
Level VI
Environmental
Specifications
Temperature
Operating: 0°C to 40°C (32°F to 104°F)
Storage: –20°C to 50°C (–4°F to 122°F)
Humidity
Operating: 20% to 80% (non-condensing)
Storage: 5% to 95% (non-condensing)
Communication
Interfaces and
Protocols
Interface
USB 2.0, 480 Mbit/s “High Speed”
Host USB Power
Reader can be powered from a single host USB 2.0
connector
USB connectors
One USB Type-B connector (host)
Two USB Type-A connectors (peripherals)
USB cable length
2.00 m (79 inches)
Aux. USB power
5V DC, 500mA per port (with external power supply only)
RF Chip
ISO 14443-2, 3, 4 Type A and B with PC/SC driver
Optional Power
Supply Specifications
Input voltage
100V to 240V AC +/-10%
Line frequency
47 Hz to 63 Hz
Cable length
Power supply cable: 1.3 m (52 inches)
AC line cord: 2.0 m (78 inches)
Power rating
15W
Smart Card
Communication
Interfaces and
Protocols
Protocol
T=1, T=0
Frequency
Up to 8 MHz (PPS, DI parameter)
Communication speed
Up to 344,105 bit/s (PPS, Fl parameter)

Gemalto AT9000 MK2 Specifications

General

Brand	Gemalto
Model	AT9000 MK2
Category	Scanner
Language	English