Gemas PURITRON GSC 20

To Next Page

GEMAS pH CONTROLLED

PURITRON

SALT WATER CHLORINATOR

INSTRUCTION MANUAL

1. Introduction

2. Salt Water Chlorinator Description

3. Installation

4. Water Preparation

5. Salt Addition

6. Operating

7. Recommendations

8. Technical Characteristics

9. Warranty, After-Sales Service and Spare Parts

Main Page

Need help?

Do you have a question about the Gemas PURITRON GSC 20 and is the answer not in the manual?

Summary

Installation

Control Unit and Electrical Installation

Guidance on mounting the control unit and connecting power, ground, and pump contactors for safe operation.

Cell Housing and By-Pass Installation

Instructions for installing the cell housing, by-pass system, and recommended vertical positioning for optimal function.

pH Dosing Pump and Flow Cell Setup

Water Preparation

Salt Addition

Salt Dissolving and Dosage Procedure

Operating

Basic Operation and Display Explanation

pH Mode Setup

pH Dosage Pump Control Modes

pH Setting and Calibration

Configuring desired pH levels, tolerance, buffer selection, and the calibration process for accurate readings.

Fault Messages and Cell Cleaning

Understanding Fault Indicators

Manual Cell Cleaning Procedure

Step-by-step guide for manually cleaning the cell, including rinsing and acid treatment for deposits.

Warranty and After-Sales Service

Warranty Coverage and Exclusions