- 7 -
Camera features
Features
− Capable of recording images at VGA or CIF resolutions
− AVI clip in CIF format
− Auto exposure and auto white balance functions
− 8 MB internal memory
− USB connection
Selecting the power supply
Important battery information
It is strongly recommended that you use fresh batteries to optimize the
performance of your camera. You may use alkaline AAA batteries.
Note:
• Do not use different types of batteries together.
• Do not use Ni-MH or Ni-Cd or any rechargeable batteries.
• Soiling, such as fingerprints on the battery terminals, can significantly
reduce the battery life.
• Do not use new and used batteries together.
• Different brands of batteries will yield different results.
• The battery life of alkaline batteries may be shortened when exposed to
temperatures of 10°C or below.
• Always turn the camera off when replacing the batteries. If the camera is
left on, the camera’s settings may revert to the default settings.
• After 30 seconds of inactivity the camera will switch to standby mode
automatically. The LCD will not be illuminated and all images will be
stored in the camera’s memory.
• You may lose images stored in the camera if the battery power is
insufficient.
Insert batteries
1. Open the Battery Compartment Door and insert 2 x AAA batteries. When
inserting the batteries, make sure that you follow the polarity direction (+)
(-), which is indicated in the battery compartment.
2. Press down on the battery cover to lock the battery door.
3. Please make sure you have downloaded all pictures before replacing your
batteries.
To Next Page
Loading...
Need help?
General