GEMORO AuRACLE
®
ANALYZER
GOLD & PLATINUM TESTER
• Battery power level indication feature
• Compact and portable
• Powered by a 9V alkaline battery (not included) or the supplied 100V-240V
multi-voltage AC adapter
• Includes: ANALYZER, pen probe, file, and AC adapter
• One-year limited warranty – PATENTED
SPECIFICATIONS:
• Working Voltage: DC 9V (1) × 9V alkaline battery (approximately 11.5 hours of
continuous use).
• Warm-Up Stabilization Time: Approximately 3 seconds.
• Ideal Working Temperature: 65F to 75F.
• Ideal Air Relative Humidity: 25% to 50%.
CAUTION:
Disassembling the ANALYZER other than opening the battery compartment door
for battery replacement will void the warranty.
INSTRUCTIONAL VIDEO:
Please scan QR code to watch the instructional video:
ADDITIONAL INSTRUCTIONS
USE COMMONSENSE BEFORE INTERPRETING THE TEST RESULTS. You
should always follow some commonsense guidelines before making your final
determination of the karat value or authenticity of the precious metal being
tested. Please keep in mind that those misrepresenting fake jewelry as real can
be extremely clever and will use many tricks to make you think it is real.
GUIDELINE A. Check the markings on the piece for a karat stamp (10K or .417,
14K or .585, 18K or .750, 22K or .916, 24K or .999, GF or gold-filled, GEP or gold
electroplated, YGF or yellow gold-filled, RGP or rolled gold plated, etc.). If the test
results indicate anything dierent than the stamp, the metal should be suspect.
Test results below the 10K range must be interpreted by the user and estimated
whether it is 6K-9K.
GUIDELINE B. Be aware that any piece that tests as NA is not gold.
GUIDELINE C. Check the weight of the metal you are about to test and if it
seems too light, while it could be hollow gold, it should be suspect as it may be
costume jewelry, gold-plated or gold-filled. Gold is a dense metal and has an
associated greater weight than most other non-precious metals. Platinum is an
To Next Page
Loading...
