Need help?Do you have a question about the GemOro PRO-D 3 and is the answer not in the manual?
General| Type | Diamond Tester |
|---|---|
| Power Source | Battery |
| Detection Time | 2 seconds |
| Weight | 0.25 lb |
| Probe Type | Metal |
| Indicator | LED |
| Technology | Thermal and electrical conductivity |
Explains the method used by the tester to differentiate diamonds from simulants.
Specifies optimal temperature and humidity for accurate testing.
Emphasizes the need for dry and clean stones for accurate results.
Details the procedure for cleaning the probe tip to ensure accurate testing.
Identifies diamonds and white sapphires using color-coded lights and beeps.
Color-coded LEDs (Green, Pink, Red) indicate test results visually.
Details working voltage, battery types, and AC adapter specifications.
Lists probe tip warm-up time and battery working time.
Specifies working temperature and air relative humidity limits.
Guides on installing NiMH rechargeable or alkaline batteries, including activating NiMH.
Step-by-step guide on testing stones set in jewelry, ensuring no contact with metal.
Procedure for testing loose stones using the testing plate for accurate results.
To Next Page
