Gemu F40 - 4 Correct Use

www.gemu-group.com6 / 24GEMÜ F40
4 Correct use
3.1.2 PD seal system
Vent hole
Leak detection hole
Actuator
Opening protection
PTFE diaphragm
(PD)
Stainless steel
body
3.2 Description
The GEMÜ F40 2/2-way filling valve is designed for filling
processes in aseptic and hygienic areas of application. Flow
rates up to 6,600 l/h are possible depending on the version.
The sealing concept of the valve is based on the GEMÜ PD
design, whereby the actuator is hermetically separated from
the medium. All actuator parts (except the seals) are made
from stainless steel. Normally Closed and Normally Open
control functions are available.
3.3 Function
The product is a pneumatically operated 2/2-way filling valve
in stainless steel. The GEMÜ F40 2/2-way filling valve is de-
signed for installation in piping systems.
The filling valve can be opened or closed via 2 control func-
tions (Normally open and Normally closed).
4 Correct use
DANGER
Danger of explosion
▶ Risk of death or severe injury.
● Do not use the product in potentially
explosive zones.
WARNING
Improper use of the product!
▶ Risk of severe injury or death.
▶ Manufacturer liability and guarantee will be void.
● Only use the product in accordance with the operating
conditions specified in the contract documentation and
this document.
The product is designed for installation in piping systems
and for controlling a working medium.
The product is not intended for use in potentially explosive
areas.
● Use the product in accordance with the technical data.