Genadyne XLR8 - Operating the Device; Starting Up the System; Understanding Therapy Modes

GenadyneBiotechnologies|EN(V5.0909.1) 13

Operatingthedevice
StartingUp
Press the Power Button once. The LCD will be lighted up. The pump will start running. Suction
is immediately available.
TherapyMode
The Genadyne XLR8 provides the user with 2 therapy mode.
1. Continuous
2. Intermittent
If a symbol C is observed on the top left corner of the screen, this means continuous therapy is active.
The system sets it at continuous therapy mode by default. If the symbol I is observed, this means
intermittent therapy is in active.
Continuous Mode Intermittent Mode