To Next PageTo Next Page
Need help?Do you have a question about the Gendex ORTHORALIX 8500DDE and is the answer not in the manual?
General| Brand | Gendex |
|---|---|
| Model | ORTHORALIX 8500DDE |
| Category | Dental equipment |
| Language | English |
Details requirements and considerations before installing the Orthoralix 8500 DDE system.
Outlines the necessary power supply, frequency, and wiring requirements for system installation.
Specifies the hardware and software requirements for the computer used with the system.
Provides technical specifications including shipping size, weight, and environmental limitations.
Explains warning conventions and provides essential safety information for system operation.
Covers electrical fire, explosion, mechanical, and laser beam hazards associated with the system.
Outlines measures to protect users and patients from X-ray radiation exposure.
Details the location of identification labels and compliance with applicable safety standards.
Provides instructions for unpacking the system and mounting it via wall or free-standing.
Step-by-step guide for securely mounting the unit to a wall structure.
Instructions for assembling and positioning the unit using the optional free-standing base.
Details how to connect the system to 230V AC or 120V AC mains power sources.
Step-by-step guide for installing the CCD sensor component into the system.
Final steps to complete the system installation, including cover and switch placement.
Specifies the hardware and software requirements for the computer used with the system.
Instructions for installing the GxPicture software and driver suite on the workstation.
Guides for connecting the system to a PC or network via Ethernet.
Steps for configuring a static IP address for system communication.
Steps for configuring dynamic IP settings using DHCP for system communication.
Step-by-step process for calibrating the CCD sensor to ensure accurate image acquisition.
Explains the different states of the Pan icon in the system tray and their meanings.
Procedure to test and verify the proper alignment of the X-ray beam.
Instructions on how to adjust the system's mA output setting.
Procedure to verify the accuracy of the system's positioning lasers.
Details image parameter adjustments and usage of various imaging viewers.
Covers essential electrical system checks and line voltage regulation verification.
Procedures for verifying system performance, including lasers and exposure indicators.
Lists and explains common error codes, their causes, and clearing methods.
General guidelines for troubleshooting system issues and contacting support.
Provides technical specifications for the tubehead, including operating temperature and filtration.
Details the X-ray insert components and its electrical and thermal characteristics.
Procedure to adjust the panoramic magnification factor setting.
Guides for performing centering tests and verifying X-ray field alignment.
Recommended annual maintenance tasks to ensure optimal system performance.
Instructions for refining image quality by adjusting advanced image parameters for third-party viewers.
