Edificio Genebre. Av. de Joan Carles I, 46-48
08908 L'Hospitalet de Llobregat. Barcelona (Spain)
genebre@genebre.es - www.genebre.es
VISUAL INSPECTION
Check that the products have not been damaged during transportation, unloading and
placement on site.
During storage it is recommended that the protective packaging not be removed to
prevent any blows or the accumulation of dirt in the interior of the valve. This packaging
should not be removed unless the valve is going to be installed.
Where possible, the actuators must be stored in a dry clean place.
If during any anomaly is noticed during the observance of these guidelines for
receipt , contact GENEBRE urgently in order to resolve the liability for these anomalies.
IMPORTANT NOTE:
Before installing and/or handling these elements, CAREFULLY READ these
instructions for use and OBSERVE all information contained herein. In the event
of not understanding any of this information, please contact GENEBRE, S.A.
The responsibility for the safe use of these products is that of the user in
accordance with the contents of these instructions for use as well as the specific
technical documentation of the device supplied.
3. Technical Features & Data
3.1) Method of Operation
DOUBLE ACTING
Note: The bracketed numbers refer to the actuator exploded view – page 4.
To Next Page
Loading...