Genelec 8240A Brochure & Specs

AutoCal™ provides the industry’s fi rst integrated process for
complete automated measurement, analysis, and adjustment
of every monitoring loudspeaker in the control network to
correctly align and integrate each monitoring loudspeaker
into the mixing environment.
• Uses factory-calibrated Genelec acoustic
measurement microphone (included)
• AutoCal automatically creates a
compensation fi le for host soundcard
• AutoCal aligns Level and compensates
Distance differences
• Acoustic Response Editor provides
accurate graphical display of the
measured response, fi lter compensation
and the resulting system response for
each loudspeaker, with full manual control
of acoustic settings
• SinglePoint™ and MultiPoint™
microphone positions provide
measurements for one, two or three-
person mixing environments
AutoCal™ – Fast, easy and consistent acoustic self-calibration
In GLM™ System
• 8200 Series loudspeaker can utilize four parametric DSP notch fi lters
and four parametric DSP shelving fi lters
• 7200 subwoofers utilize four parametric DSP notch fi lters, plus bass roll
off controls
• Adjusts correct crossover phase for all subwoofers in the network
• Vertical Axis Trim for situations where loudspeaker acoustic axis cannot
be physically optimized
In GLM.SE™ System
• 8130A digital input loudspeaker can utilize two parametric DSP notch
fi lters, plus the room response controls in the loudspeaker hardware
• SE7261A subwoofer utilizes four parametric DSP notch fi lters, plus bass
roll off controls
• Adjusts correct crossover phase for SE7261A subwoofer on the
network
The Interactive Response Editor window shows the original frequency response,
correction curve created by AutoCal™ and the fi nal, corrected response.
The Loudspeaker Acoustical Setup Editor window can be used to view and edit
the settings of a loudspeaker.

Genelec 8240A Specifications

General

Brand	Genelec
Model	8240A
Category	Speakers
Language	English