GLM™ – Genelec Loudspeaker Manager™
8200 and 7200 Series
DSP Monitoring Systems
The 8200 Series monitoring systems are designed for similar near-fi eld
monitoring applications and acoustic environments as the 8000 Series
analog products, offering a wide range of performance benefi ts through
unique technologies, used and acclaimed in real-world audio productions.
The most critical listening conditions require the most advanced monitoring
tools. Customers with digital audio production environments can enjoy the
full benefi ts of new technologies with the 8200 Series.
To complement the 8200 DSP two-way systems, Genelec has developed
three robust DSP subwoofers. Built upon the proven LSE™ (Laminar Spiral
Enclosure™) technology, the 7260A, 7270A and 7271A deliver articulate
and precise low frequency reproduction.
With their four AES/EBU digital inputs and outputs the 7200 subwoofers
provide the cornerstone for monitoring room environments equipped with
fully digital monitor buss outputs. Multichannel AD conversion with Genelec
AD9200A enables use also in conventional analog monitoring environments.
All standard 7000 series functions are available in Stand Alone mode, and
additional powerful resources become available through GLM™ software.
AutoCal™, Genelec’s automated self-calibration function, provides
precise acoustic alignment and integration in virtually any control room
environment.
GLM™ software brings the entire DSP system together under
computer network control
• GLM™ provides connectivity for up to thirty loudspeaker and
subwoofers, for example twenty-fi ve 8200 Series loudspeakers and up
to fi ve 7200 series subwoofers
• Enables unlimited custom User Setups with all settings and functions
stored in GLM™ setup fi les, or one setup stored directly into each
loudspeaker for Stand Alone -use
• Step-by-step Wizard guides user through complete cabling connections
and loudspeaker labeling
• Rapid Cabling setups for most common system confi gurations
• Manual Cabling setups for customized system confi gurations
• Groups for both Channels and Loudspeakers may be customized by
User
• Solo/Mute function for all Loudspeakers and Groups
• Volume controlled via computer, 3rd party USB devices or customer
mixing console or workstation
• Video Display Compensation for compensating inherent video delays
in digital video devices
• GLM™ provides interface to AutoCal™ automated acoustic self-
calibration algorithm
8200 DSP Series back panel
7200 DSP Series connector panel
Genelec 8200/7200 DSP systems support three modes of operation:
• Stand Alone: This mode exemplifi es the standard operation of Genelec
8000/7000 products with the standard set of room response controls
and sensitivity adjustment found on connector panel DIP switches.
• GLM™ Computer Assisted: Once the network is connected and
running, all DIP switches on connector panel are ignored. All acoustic
parameters of the loudspeakers set through AutoCal™ or User
Adjustment are controlled by GLM™. This mode allows user defi ned
setups to facilitate a wide variety of mixing requirements.
• Stand Alone Stored Settings: all acoustic parameters made in GLM™
can be safely stored to all loudspeakers and the network can then be
removed, providing users with the confi dence of secure and consistent
performance when a computer with GLM™ software is not used.
To Next Page
Loading...
Need help?
General
