GLM.SE™ software brings the entire DSP system together under
computer network control
• GLM.SE™ provides connectivity for one SE7261A DSP subwoofer
combined with up to eight 8130A digital input loudspeakers
• Enables multiple custom User Setups with all settings and functions able
to be stored in GLM.SE™ setup or directly to the SE7261A subwoofer
• Step-by-step Wizard guides user through complete cabling connections
and loudspeaker labeling
• Rapid Cabling setups for most common system confi gurations
• Manual Cabling setups for customized system confi gurations
• Groups for both Channels and Loudspeakers may be customized by User
• Solo/Mute function for all Loudspeakers and Groups
• Volume controlled via computer, 3rd party USB device or customer
console
• Video Display Compensation for inherent video delays in digital video
devices
• GLM.SE™ provides interface to AutoCal™ automated acoustic self-
calibration algorithm
SE7261A
8130A
SE7261A connector panel
SE™ DSP Monitoring System
The Genelec SE™ (Small Environment) DSP System brings a new approach
to solving acoustic issues with small recording and mixing environments.
Smaller production rooms beg for sensible solutions in monitoring. The
SE™ DSP System brings easy to use and affordable Genelec quality to this
wide range of customers. The system utilizes the new 10” SE7261A DSP
subwoofer in combination with the 8130A digital input active monitors. The
SE™ System easily confi gures into all popular audio confi gurations from
subwoofer-assisted stereo to multi-channel reference systems. GLM.SE™
software control of the SE7261A DSP subwoofer provides all necessary
network connections to the host computer and supplies extensive DSP
resources for the 8130A digital input loudspeakers through its AES/EBU
digital high-pass outputs.
GLM.SE™ – Genelec Loudspeaker Manager™
for Small Environments
Genelec GLM.SE systems support three modes of operation:
• Stand Alone: This mode models Genelec 8000/7000 products with
standard set of room response controls and sensitivity adjustments
found on the connector panel DIP switches.
• GLM.SE™ Computer Assisted: Once the loudspeaker control network
is connected and running, all DIP switches on the SE7261A connector
panel are ignored. All acoustic parameters of the loudspeakers set
through AutoCal™ or User Adjustment are controlled by GLM.SE™.
This mode allows very fl exible user defi ned setups to facilitate a wide
variety of mixing requirements.
• Stand Alone Stored Settings: All acoustic parameters defi ned in GLM.SE™
software can be permanently stored in the SE7261A and the network then
removed, providing users with the confi dence of secure and consistent
performance when a computer with GLM.SE software is not used.
To Next Page
Loading...
Need help?
General
