Genelec aiw26b - Page 10

RAM1 AMPLIFIER UNIT
AIW26B LOUDSPEAKER UNIT
Lower cut-o frequency, -6 dB: < 39 Hz
Upper cut-o frequency, -6 dB: > 25 kHz
Accuracy of frequency response, (±2.5 dB): 45 Hz...21 kHz
Maximum short time sine wave acoustic
output at 1 m on axis in half space,
averaged from 100 Hz to 3 kHz:
>110 dB SPL
Maximum peak acoustic output for a pair
with music material:
>120 dB SPL
Drivers
Bass:
Treble:
165 mm (6.5 in)
19 mm (
3
/4 in) metal dome
Harmonic distortion at 90 dB SPL @ 1 m
on axis:
< 3% (50...200 Hz)
< 0,5% (>200 Hz)
Weight including grille assembly: 11.1 kg (24.4 lbs)
Required cut-out dimensions
Height:
Width:
Depth:
545 mm (21
1
/2 in)*
334 mm (13
1
/8 in)
88 mm (3
1
/2 in)**
*Note: The mounting brackets of the AIW26 need a clearance inside the
wall of at least 125 millimeters (5 in) above the top edge of the cut-out and
65 mm (2
9
/16 in) below the lower edge.
**Note: Depth = Free space requirement inside the wall cavity.
Bass amplier output power: Short term 120 W
Treble amplier output power: Short term 120 W
Input impedance: 10 kOhm
Crossover frequency: 3.5 kHz
Treble tilt control in 2 dB steps from
+2 to -4 dB & MUTE:
@15 kHz
Bass roll-o control in 2 dB steps from
0 to -6 dB:
@50 Hz
Bass tilt control in 2 dB steps from
0 to -6 dB & MUTE:
@100 Hz
Mains voltage: 100/200V or 115/230V
Power consumption
(Standby / Idle / Full output): 23/23/200 W
Maximum ambient temperature 35°C (95°F)
Weight: 4.6 kg (10.1 lbs)
Dimensions
Height:
Width:
Depth:
130 mm (5
1
/8 in)
145 mm (5
3
/4 in)
309 mm (12
3
/16 in)