EasyManua.ls Logo

Generac Power Systems 005336-0, 005337-0 User Manual

Generac Power Systems 005336-0, 005337-0
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
STANDBY GENERATOR
OWNER'S MANUAL
This manual should remain with the unit.
A new standard of reliability
Serial Number
1.6L
20kW
Models: 005336-0
005337-0
CAUTION
ONLY QUALIFIED ELECTRICIANS OR CONTRACTORS SHOULD ATTEMPT INSTALLATION!
DEADLY EXHAUST FUMES. OUTDOOR INSTALLATION ONLY!
Not intended for use in critical life support applications.
Cover079 Rev. 0 07/06 Part No. 0G2966

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems 005336-0, 005337-0 and is the answer not in the manual?

Generac Power Systems 005336-0, 005337-0 Specifications

General IconGeneral
Model Number005336-0, 005337-0
CategoryInverter
Frequency Output60 Hz
Fuel TypeGasoline
Warranty3 Years Limited
Voltage Output120 Volts
Engine TypeOHV

Summary

Safety Rules

General Safety Hazards

General safety precautions and responsibilities for the operator and technician.

Electrical Hazards

Warnings and precautions related to high voltages and potential electric shock.

Fire and Explosion Hazards

Precautions to prevent fire risks and avoid explosive gas buildup.

Engine Protective Devices

Installation

Preparation Before Start-up

Steps to prepare the generator for initial operation, including fluid checks.

Transfer Switch Requirements

Requirements and procedures for installing a transfer switch.

Fuel System Preparation

Ensuring the fuel supply system is correctly connected and purged.

Electrical System Preparation

Verifying battery charge and electrical connections are secure.

Initial Inspection for Startup

Pre-startup checks for freight damage, manuals, fluids, and connections.

Start-up Checklist

A comprehensive list of checks to perform before starting the generator.

Start-up Inspection

Final checks and documentation required after initial start-up.

Operation

Generator Control and Operation

Overview of the generator's control panel and basic operation.

Operating Unit with Manual Transfer Switch

Procedure for operating the generator using a manual transfer switch.

Engine Start-up and Transfer

Steps for starting the engine and transferring the load.

Retransfer and Shutdown

Procedure for returning the load to utility power and shutting down the engine.

Operating Unit with Automatic Transfer Switch

How to operate the generator with an automatic transfer switch.

Maintenance

Maintenance by Service Facilities

Tasks recommended for authorized service personnel.

Scheduled Maintenance Intervals

Periodic maintenance tasks categorized by time or operating hours.

Cooling System Maintenance

Procedures for inspecting and maintaining the cooling system.

Service Schedule

Troubleshooting Guide

Diagrams and Schematics

Related product manuals