Generac Power Systems 006873

Owner’s/Installation Manual for SMM i
(000209a)
WARNING
This product is not intended to be used in
a critical life support application. Failure to
adhere to this warning could result in
death or serious injury.
Owner’s/Installation Manual
Smart Management Module
(SMM)
SAVE THIS MANUAL FOR FUTURE REFERENCE
MODEL: 006873
DATE PURCHASED:______________
WWW.GENERAC.COM
1-888-GENERAC
(1-888-436-3722)
Para español , visita: http://www.generac.com/service-support/product-support-lookup
Pour le français, visiter : http://www.generac.com/service-support/product-support-lookup
000922

Generac Power Systems 006873 Specifications

General

Brand	Generac Power Systems
Model	006873
Category	Controller
Language	English

Summary

Introduction and Safety

Safety Rules

Safety Warnings and Definitions

Explains DANGER, WARNING, CAUTION, and NOTE terminology used for safe operation and potential hazards.

Installation, Tests and Troubleshooting

Mounting Instructions

Connections

Setting Priorities

Explains how to set module priorities for load recovery timing during generator overload.

Setting Lockout

Utility Test

Procedure for testing the Smart Management Module (SMM) under utility power conditions.

Generator Test

Procedure for testing the Smart Management Module (SMM) during generator operation and overload simulation.

Generator Test with Lockout Switch Enabled

Specific test procedure for SMMs with the lockout switch enabled during generator power.

Return to Utility Test

Procedure for verifying the SMM's recovery and operation when utility power is restored.

Troubleshooting