To Next PageTo Next Page
Need help?Do you have a question about the Generac Power Systems 004892 and is the answer not in the manual?
General| Model Number | 004892 |
|---|---|
| Manufacturer | Generac Power Systems |
| Category | Controller |
| Frequency | 60 Hz |
| Phase | Single |
| Voltage Rating | 120/240V |
| Humidity Range | 5% to 95% non-condensing |
Outlines general safety rules and precautions for using the equipment.
Defines and explains the DANGER, WARNING, and CAUTION symbols used in the manual.
Details the transfer mechanism, main contacts, and actuation.
Emphasizes reading safety rules and warnings before use to prevent accidents.
Provides instructions and safety warnings for mounting the transfer switch enclosure.
Details how to connect power source and load lines, with safety warnings.
Guides on connecting generator start circuit wires and recommended wire gauges.
Outlines the process for performing functional tests and ensuring correct installation.
Details the steps for manually operating the transfer switch, with safety warnings.
Guides on checking utility and generator voltage levels for compatibility.
Provides a procedure for testing the generator operation under various load conditions.
Outlines steps to verify the system's automatic transfer and operation sequence.
The initial screen showing overview of connections, status, and switch position.
Explains the mimic diagram and system status indicators like READY and EXERCISING.
Lists parameters and default values for configuring transfer switch sequences.
Covers settings like Inphase/TDN selection, and System Voltage Selection.
Details settings for voltage thresholds and delays for utility fail/pickup.
Covers timers for engine warmup, cooldown, and minimum run time.
Details frequency thresholds for utility fail/pickup and related settings.
Guides on performing manual tests like TEST and FAST TEST functions.
Explains how to interpret the system status screen for operation and troubleshooting.
Details annual cleaning and inspection procedures to check for damage.
Recommends annual checks of main current carrying contacts by authorized service dealers.
Details registers, data, and notes for Modbus communication with the transfer switch.
