Name: Generac Power Systems 04673-2
Brand: Generac Power Systems
Rating: 4 (1 reviews)

To Next Page

To Previous Page

ERRATA SHEET

ALL 8.5 kW THROUGH 15 kW HOME STAND-BY GENERATORS WITH

GT-990/760 ENGINES

2/24/06

! IMPORTANT INFORMATION !

THE SPARK PLUG GAP FOR ALL 8.5 kW THROUGH

THE 15 kW HOME STAND-BY GENERATORS WITH

THE GT-990/760 ENGINES SHOULD BE SET AT 1.02

mm (0.040 inch). THE RECOMMENDED SPARK PLUG

IS CHAMPION #RC12YC (PART NO. 0G0767A).

P/N: 0G0730 REV. A

Introduction2
- Read this Manual Thoroughly2
- Contents2
- Operation and Maintenance2
- How to Obtain Service2
- Table of Contents3
Safety Rules4
- Standards Index5
Section 1 - General Information6
Unpacking/Inspection6
Protection Systems6
System Set LED6
The Generator7
Your Generator7
Specifications8
- Generator8
- Engine8
Fuel Requirements and Recommendations9
Fuel Consumption9
Reconfiguring the Fuel System9
- Kw, 410CC9
- Kw and 15 Kw, 990Cc Engines9
Location10
- Generator10
- Transfer Switch10
Battery Installation11
The Battery11
Section 2 - Post Installation Start-Up and Adjustments12
Before Initial Start-Up12
Check Transfer Switch Operation12
Electrical Checks12
Generator Tests under Load13
Checking Automatic Operation13
Adjusting the Regulator (Natural Gas Only)14
Engine Governor Adjustment14
- Kw Units14
- Kw and 15 Kw Units15
- Additional Corrosion Protection15
Voltage Regulator Adjustment15
Auto" Position16
Manual" Position16
Off" Position16
Section 3 - Operation16
Break-In Procedure16
Using the Auto/Off/Manual Switch16
Automatic Transfer Operation16
Sequence of Automatic Operation16
Manual Transfer Operation17
- Transfer to Generator Power Source17
- Transfer Back to Utility Power Source17
Setting the Exercise Timer18
Protection Systems18
- Low Oil Pressure Switch18
- High Temperature Switch18
- Overcrank18
- Overspeed19
Section 4 - Maintenance19
Fuse19
Checking the Engine Oil Level19
Changing the Engine Oil19
- Engine Oil Recommendations19
- Oil Change Procedure20
Changing the Oil Filter20
Changing the Engine Air Cleaner20
- Kw, 12 Kw and 15 Kw20
- Generators20
Spark Plug(S)21
Battery Maintenance21
Adjusting Valve Clearance22
Cooling System22
Attention after Submersion23
Corrosion Protection23
Out of Service Procedure23
- Removal from Service23
  - Return to Service23
Service Schedule24
Section 5 - Troubleshooting25
Troubleshooting Guide25
Section 6 - Electrical Data26
Section 7 - Exploded Views and Parts Lists34
Section 8 - Mounting Dimensions52
Section 9 - Notes53
Section 10 - Warranty54
Important Information57

Brand	Generac Power Systems
Model	04673-2
Category	Inverter
Language	English

Generac Power Systems 04673-2 User Manual

Table of Contents

Questions and Answers:

Generac Power Systems 04673-2 Specifications

Related product manuals