Section 1.7
SHEET METAL
ITEM QTY DESCRIPTION
1 1 PLATE, DIVIDER
2 2 M6-1.0 HEX NUT
3 1 SEAL RUBBER EXTRUSION 3.5 FT
4 1 WRAPPER, BOX
5 31 TAPTITE, M5- .8 x 10MM LONG
6 2 MOUNTING RAILS
7 12 M8 LOCK WASHER
8 4 M8-1.25 x 35MM HEX HD. CAPSCR.
9 2 HHCS M5-0.8 x 40MM
12 1 SPARK ARRESTOR
13 1 U-BOLT, W/SADDLE & NUTS
17 1 DEFLECTOR, AIR OUT
18 1 ASSEMBLY, MUFFLER
19 1 HOUSING, LOWER FAN
20 1 SKIRT, CARB. BAFFLE
21 1 COVER, ROCKER COVER
22 1 SKIRT, SPARK PLUG SIDE
23 1 PAN, BELLY
24 1 FRAME
25 1 GROUND STRAP
26 1 PLATE, BASE COVER
27 1 PUMP, FUEL
28 1 BARBED 90 1/8" x 1/4"
29 3 HEX NUT 1/4"-20
30 7 LOCK WASHER-1/4"-M6
31 1 CONTACTOR, STARTER
32 1 BOOT, CONTACTOR
33 1 SEAL, OIL FILTER HOLE
34 1 RETAINER, SEAL
35 4 M8 FLAT WASHER
36 1 1/4" FUEL LINE-4" LONG
37 5 1/4" HOSE CLAMP
38 1 SNAP BUSHING
39 4 SPECIAL LOCK WASHER, M5
40 2 #8 HEX NUT
41 2 #8 LOCK WASHER
ITEM QTY DESCRIPTION
42 2 HEX HD. CAPSCR. M6-1.0 x 16MM-
W/LOCKWASHER
44 3 SPECIAL LOCK WASHER, M6
45 1 GROUND STRAP, UNIT
47 1 1/8" x 3/16" NPT 90 DEG.
BARBED FITTING
48 1 BRACKET, MUFFLER HANGER
49 1 1/4" FUEL LINE (8" LONG)
50 1 3/16" CARBURETOR LINE (4" LONG)
51 1 FUEL FILTER
53 1 STARTER CONTACTOR GROUND
WIRE
54 1 SEAL, WASHER EXHAUST PIPE
57 1 PANEL, WRAPPER BOX
59 13 CRIMPTITE #10-24 x 1/2"
60 1 HEX HD. CAPSCR., M5-0.8 x 12 G8.8
61 2 CUSTOMER MOUNTING BRACKET
62 4 VIBRATION MOUNT
63 2 EARTHING STRAP
64 8 HEX NUT M8
65 3 VIBRATION MOUNT
67 2 TAPTITE 1/4"-20 x 1-1/4"
68 2 TAG, REMOVE BOLT
69 6 FLAT WASHER #10-M5
70 1 BRACKET, IGNITION SYSTEM
71 2 SPACER, IGNITION COIL
72 1 MODULE, IGNITION
73 1 ASSEMBLY, IGNITION COIL
74 2 M6-1.0 x 35MM HEX HD. CAPSCREW
75 4 M6-1.0 HEX NUT
76 2 M5-0.8 x 12MM-PPHMS
77 2 M5-0.8 HEX NUT
78 4 LOCK WASHER M5
79 1 RUBBER "U" CHANNEL 0.5 FT
80 1 CRIMPTITE #10-24 x 3/8"
81 1 COVER, IGNITION SYSTEM
Page 1.7-3
PARTS LIST FOR SHEET METAL (GASOLINE UNITS)
To Next Page
Loading...
