4 of 5
7kW
ES Standby Generator System - 7 kW features and benefits
Model 005888-0
No. of Poles 2
Current Rating (Amps) 50
Voltage 120/240 1Ø
Utility Voltage Monitor (Fixed)*
-Pick-up
-Dropout
80%
60%
Return to Utility* approx. 15 sec.
Exercise weekly for 12 minutes* Standard
UL Listed Standard
Total of Pre-wired Circuits
No. 15A 120V
No. 20A 120V
No. 20A 240V
No. 30A 240V
No. 40A 240V
No. 50A 240V
8
5
1
-
1
-
-
Circuit Breaker Protected
Available RMS Symmetrical
Fault Current @ 250 Volts
10,000
Weight (Pounds/Kilos) 25/11.3
Transfer Switch Features
• Electrically operated, mechanically-held
contacts for fast, positive connections.
• Rated for all classes of load, 100%
equipment rated, both inductive and
resistive.
• 2 pole, 250 VAC contactors.
• 160 millisecond transfer time.
• NEMA 1 (indoor rated) enclosure is standard.
• Flush mountable.
Dimensions
Mechanical Dimensions (in inches/mm)
Amps
Height Width
Depth
H1 H2 W1 W2
50
18.5 in 23 in 10.5 in 15.38 in 3.4 in
470 mm 584 mm 267 mm 391 mm 86 mm
Wire Ranges
Amps Neutral Lug Ground Lug
50 2/0 - #14 2/0 - #14
H1
W1
D
W2
H2
*Function of Controller
To Next Page
Loading...
Need help?
General
