EasyManuals Logo
Home>Generac Power Systems>Pressure Washer>OneWASH

Generac Power Systems OneWASH User Manual

Generac Power Systems OneWASH
110 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Section 7 Troubleshooting
7.1 -- TROUBLESHOOTINGGUIDE
Detergent fails to mix with 1. Detergent siphoning tube is not 1. Insert detergent siphoning tube into detergent.
spray, submerged.
2. Detergent siphoning tube/filter is clogged 2. Clean or replace filter/detergent siphoning
or cracked, tube.
3. High pressure nozzle installed. 3. Replace with low pressure nozzle.
Engine runs welt at no-load 1. Engine speed is too slow. 1. Contact a local service facility to adjust throttle
but bogs when load is mechanism.
added.
Engine will not start; or 1. Dirty air cleaner.
starts and runs rough. 2. Out of fuel.
3. Stale fuel.
4. Spark plug wire not connected to spark
plug.
5. Bad spark plug.
6. Water in fuel.
7. Excessively rich fuel mixture.
1. Clean or replace air cleaner.
2. Fill fuel tank.
3. Drain fuel tank; fltt with fresh fuel.
4. Connect wire to spark plug.
5. Replace spark plug.
6. Drain fuel tank; fill with fresh fuel.
7. Contact local service facility.
Engine shuts down during 1. Out of fuel. 1. Fill fuel tank.
operation.
Engine lacks power. 1. Dirty air filter. 1. Replace air filter.
OneWASH TM Power Washer 31

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Generac Power Systems OneWASH and is the answer not in the manual?

Generac Power Systems OneWASH Specifications

General IconGeneral
BrandGenerac Power Systems
ModelOneWASH
CategoryPressure Washer
LanguageEnglish

Related product manuals