To Next Page
R
rashleyJul 31, 2025
What to do if the no load voltage frequency falls off on my Generac Power Systems XP8000E?
- KKim AlvaradoAug 1, 2025
First, verify that the rotor is spinning. Then, proceed to problem 3 for further troubleshooting steps.
What to do if the no load voltage frequency falls off on my Generac Power Systems XP8000E?
First, verify that the rotor is spinning. Then, proceed to problem 3 for further troubleshooting steps.
General| Model | XP8000E |
|---|---|
| Type | Portable Generator |
| Starting Watts | 10000 |
| Rated Watts | 8000 |
| Running Watts | 8000 |
| Engine | Generac OHV |
| Engine Type | 4-Stroke |
| Engine Displacement | 420 cc |
| Fuel Type | Gasoline |
| Run Time at 50% Load | 11 hours |
| Voltage | 120/240V |
| Frequency | 60 Hz |
| Wheel Kit | Included |
| Weight | 200 lbs |
| Fuel Tank Capacity | 7.5 gallons |
| Outlets | 1 x 120/240V |
| Starting System | Electric/Recoil |
